Assembly Instructions for the 811 Fittings and 910 Series Hose
STEP 01
Remove socket from fitting and ensure the hose has clean square cut ends.
STEP 02
Feed the hose into the socket with a turning motion, feeding the braid in as you turn the hose.
STEP 03
Hold the fitting in a vice with smooth or soft jaws, and lubricate the threads with a light oil.
STEP 04
Push the hose firmly onto the thread whilst rotating the hose and socket together. Hand tighten both the hose and socket until it becomes too tight to move.
STEP 05
Finish tightening the socket using an aluminium spanner, continue turning the socket until it reaches the base of the thread.
STEP 06
When the socket reaches the base of the thread keep turning for an extra 1.5 complete turns.
Follow Us on Social Media
For all Latest information and what we are up too... Give us a follow
