£

cart

Cart is empty

Sub total:
total:

Assembly Instructions for TF-TU25, 536 Hose and Push Fit Fittings

536_01.jpg__PID:b07d2014-c73d-4dfd-b551-eddc496297a3

STEP 01

Cut hose at the required length using a fine tooth saw blade or cut off wheel. Clean any loose debris from both the cut ends and inside the hose.

536_02.jpg__PID:d8a0de2b-5fb2-4b85-aa08-8075bd4dde8e

STEP 02

Hold the fitting in a bench vice, lubricate the fitting tail and inside the hose.

Tip: Submerge the end of the hose in hot water to soften and ease assembly.

536_03.jpg__PID:e72760d3-a439-45d2-8b0f-650d20ae2b35

STEP 03

Push the hose over the fitting tail until it is tight behind the red hose finisher.

536_04.jpg__PID:5da648af-3795-47cf-8452-b7033e89bc55

STEP 04

Please Note: Straight female fittings require the use of a male adaptor during hose assembly to stop the fitting tail turning.

536_str.jpg__PID:5bc19d2a-3ca9-4d3d-a2e1-43622796f5b6

STEP 05

Finished straight hose assembly

536_45.jpg__PID:329445b6-8fd9-479f-8de2-164fd08e2f05

STEP 06

Finished 45 deg hose assembly