Assembly Instructions for Hardline and Fittings
STEP 01
Bend tube to suit installation using a hardline bending tool and observing the minimum bend radius (15mm for -4 and -6 tube)
STEP 02
Deburr and remove any loose pieces of Hycot® cover. Measure and mark 21 mm from the end of the hardline.
STEP 03
Slide socket and olive onto hardline until it reaches the 21 mm mark made in step 2
STEP 04
Using an appropriate spanner, assemble the socket until the socket completely covers exposed threads (2mm - 2.5mm between socket and hex)
STEP 05
Assemble other end repeating steps 1-4 and pressure test assembly.
NOTES
1. Once assembled, the hardline fitting should NOT be loosenedand re-assembled. The olive ispermanently attached afterassembly and cannot be removed. 2. For production, we recommend building one template and copying all bends and dimensions from this master sample.
Follow Us on Social Media
For all Latest information and what we are up too... Give us a follow
